Recently I decided to format your phone through the application SP Flash Tool and faced with the problem of this nature, after formatting Stock firmware is not what would not sewn through the utility. Naturally, I wanted to understand and find the solution to this problem. So, if you suddenly decided otfarmotirovat your device through SP Flash Tool, after the formatting you need to do some simple manipulations.
Go to "My Computer – System Properties – Device Manager"
We reserve the window for a while at rest
Go back to the SP Flash Tool
We see that after you connect your phone to the PC with the flashing, the phone refuses to completely sewn
Phone reserve connected to the PC
Go back to the "Device Manager"
We see roughly the "Alcatel" (literally do not remember)
Right click on your PC and click to remove the driver (if you sign the other, try to remove all the same)
After that, our detachable device from the USB
Go to the SP Flash Tool click the button "Download" and again we catch our device
I recommend using the SP Flash Tool (attached)
Drivers (full pack) (attached)
Installation:
Downloading drivers
Unpack your desktop
Go to "My Computer – Properties – Device Manager"
Remove the battery
Hold the power button and volume rocker, you can try a power button
Stick the USB cable phone
It should be determined as an unknown device in the file manager
Click the right mouse button and click "Update Driver" like an inscription
And choose to install from the folder and select daddy unpacked on your desktop (it automatically installs, I decided not to fool with bulkhead drivers manually)
Next, turn on the phone
Источник: funn-rom.my1.ru