● ROM status bar function code re-reference aurora ROM, and PIXIE ROM expressed thanks!
● Disclaimer: ROM default closed full-featured NFC, if necessary, please go to the personality settings – Advanced – open the full-featured NFC, I do not open the full-featured NFC any problems caused by responsibility! (NFC latest read and write files extracted from the official V2.06)
● recommended use of the silent star of the TWRP recovery Brush
● built-in part of the software through the individual settings in the system to simplify the deletion do not want to wait two minutes directly to cool search a simple Unloader can be.
● All current Android7.X versions can not use the Xposed framework! Please know!
● Recommended when the power is higher than 50% and connect the charger brush machine! After the first boot please set personal preferences and then restart the phone fluency back! The official home phone ring tones to read the slow need to have a call ringtones BUG, we need to pay attention to the next ring tones! (
Recommended to open the call flash)
ROM download (ROM download) ROM complete package: ● Warning: This version is Android7.1.1 version, brush machine before the proposed reading this paste [Andrews 7.1.1] latest development board Note http: // bbs. Nubia.cn/thread-816785-1-1.html ● If your current version is my last Android7.1 perfect version or on the last Android7.1. 1 The first version of the system can not double upgrade. The recent network disk aunt do, there are downloaded damaged ROM, resulting in a lot of friends brush machine failure or card boot animation! To this end, I provided a ROM complete package MD5 check code: CD9F6CCB8806C3BFE2F1775D435E80C1 suggested that you download the ROM comparison under the MD5 check code, if consistent , then download the ROM no problem. Please rest assured brush machine. Correct brush machine steps: brush into the silent star of the TWRP recovery (if it has been brushed please ignore) – to copy the ROM to the phone copy – restart to recovery – first double clear (click the clear button and then slide the following slider Can) – return to choose to install and find ROM click to install! Brush successfully restart directly! Please do not brush machine after the success of running double-clear system, or personality settings will not be able to enter the use! The The Teng net disk (micro cloud):
● on the micro-cloud prompts to download traffic exceeds the limit, please try again or try to share the number of downloads over the outside limit of the solution
● click the brush package right to save to the cloud to log their own qq number, and then to their own micro-network disk Click to download!
● The ROM, Z11 no border, Z11 black gold version has been tested through the brush
● this post has been automatically set to 6 days after the automatic cancellation of hidden reply! So thank you moderator trouble do not have to re-edit this sticker
● 20170325 modify the update content log:
● based on V5.17.3.24 | development version upgrade system version to the latest V3.75 development version (V5.17.3.24 | development version) re-based on V3.75 insert related multi-function code
● Based on V5.17.3.24 | development version of the new support black domain patch (to prevent the operation ) through the black domain can effectively block the rogue program in the background secretly run to the system to bring more power, saving memory (black Do not open, there is a need to set the personality to open, the specific steps to open: Set – personality settings – find the black area to prevent click to install! After installation to open the black domain patch This switch can immediately use the black domain, no need to restart the system.
● Based on V5.17.3.24 | Development version optimization status bar layout time left when the custom runner layout and power
percentage and signal far from the problem ● based on V5.17.3.24 | development version to re-modify the desktop rearrangement icon
● based on V5 .17.3.24 | developer Edition issue version fixes some friends to restart the boot animation card
● based V5.17.3.24 | developer Edition extracted using official V2.06 limit NFC reader integrated into the file system, the default is not open Can be set to turn on personalized NFC reader
● based V5.17.3.24 | Dev joined the pictorial and the default lock screen lock screen and pull-down status bar displays the lunar features, currently Illustrated lock screen, the default lock screen, pull down the status bar are Lunar display support.
● Based V5.17.3.24 | development version added a personal source compiler optimization of ZTE screen assistant assistant sliding screen fluency, support assistants do press the screen return key, Home key and other four kinds of multi-function buttons
● Based V5.17.3. 24 | Development Edition Join ROOT License ROOT Card Brush from @ Xi Lan Yan Mo Mei Thank you Xi Lan Lan Mo's selfless dedication, has been integrated into the ROM, and upgrade to the latest SuperSU to the latest V2.79-SR3 version and do software Get the ROOT privilege prompt to optimize and consolidate the main program into the system partition.
● Based on the V5.17.3.24 | development version has joined the three status bar layout switch, support the following layout switch: time center (imitation Apple layout) time left (custom runners show optimization ) time right (default layout) and perfect Layout fixes the first edition of the high-speed bug with the WIFI icon overlay.
● Based on V5.17.3.24 | Development Decompilation Status Bar In the original APK based on the insertion of multi-function code to achieve the following functions : Status bar time Added: significant seconds, 12/24 hour system switch, display week, display date, Show the year, show the year, the time to refine (show morning, morning, noon …) and so on (show the child,
ugly when …), etc. ● based on V5.17.3.24 | development version joined the status bar network Speed support the following mode switch: disable, display upload speed, display download speed, display upload and download speed!
● Based on the V5.17.3.24 | development version to join the sliding status bar to adjust the brightness , double-click the status bar and long press the status bar to support the following operations: no operation , power menu, lock screen, return, background tasks, home key, menu Key to end the current application.
● Based on V5.17.3.24 | The development version includes the ability to display the SIM runner and supports custom runner text and insert the font anti-color code.
● Based on the V5.17.3.24 | development version has joined the shaking mobile phone action, including : no operation , power menu, lock screen, return, background tasks, home key, menu key, the end of the current application .
● Based on V5.17.3. 24 | development version adds more personality features, support system animation switch, contains 7 different animation effects. Supports font switching, including 6 different fonts. Support set transparent.
● Based on V5.17.3.24 | development version has added a number of auxiliary functions, including call flash, night mode, screen assistant , red envelope assistant, lock screen automatically clean memory, call recording, full function NFC, hardware acceleration, disable the phone housekeeper, Customize the conversion of 420-480DPI, freeze the system, and view the connected WIFI password. (PS: already mentioned functions are used to achieve the code).
● based on V5.17.3.24 | development version of the added ringtones switch, low power ringtones switch, the default open to the
personality set off ● based on V5.17.3.24 | development version to join VIPER4 Viper sound, the default does not open, need to be To the personality set to open the installation!
● based on V5.17.3.24 | development version of the personality settings – play machine new RE manager, the default is not
installed , you need to click to install ● based on V5.17.3.24 | development version of the new boot animation switch, currently supports three Animation, that is disabled (that is, Nubian official animation), Google animation (that is, the first few versions we see the animation), native animation (that is, the whole boot only show android boot faster).
● Based on V5.17.3. 24 | development version added performance control FM function supports setting four different operating modes:
● Mode 1: power-saving: Close CPU2 and CPU6 (8-core machine processing) switching CPU0 and CPU4 operation mode for the 810 processor and powersave GPU frequency is the lowest, and turn on temperature control
● Mode 2: Daily use: turn on CPU0 CPU2 CPU4 CPU6 and other core, and switch CPU0 and CPU4 running mode for ondemand and for 810 processor GPU frequency for daily use, and turn on temperature control
● mode Three: high performance: turn off the temperature control and activate the CPU0-4 core, and set the CPU0 CPU4 operating mode for the interactive and for the 810 processor GPU frequency is higher, and lift the temperature control
● mode four: performance mode: the implementation of the lifting temperature Related command control and activate CPU0-CPU7 related core and set the operation mode for the performance and modify 810 processor GPU frequency is highest, and lift the thermostat
● based V5.17.3.24 | developer Edition performance memory modules new fine-tuning, self-support Define the input virtual machine initial memory (control the Build.prop dalvik.vm.heapstartsize parameter), apply the maximum allowed (control Build.prop dalvik.vm.heapgrowthlimit parameters), the maximum virtual machine memory (control Build.prop in dalvik.vm.heapsize parameters) PS: personal understanding of the meaning of the name, if any misunderstanding, please forgive me ha ….
● Based V5.17.3.24 | developer Edition joined the open core model for full core full load full load, have been tested in the Z9 without borders, Z9MAX, Z9MINI, Z11MINI other eight-core machine in the fully charged case is loaded with eight-core open
● based V5.17.3.
24 | development version of the addition to the lifting of the temperature control rewrite the lifting temperature control related code, it is recommended to open the eight nuclear full load before the start to lift the temperature control ● based on V5.17.3.24 | development version support to modify the CPU frequency , and for the Z11 model done Parameter support CPU0-CPU1 up to 1593600 and CPU2-CPU3 up to 2150400
● based on V5.17.3.24 | development version of the mandatory modification selinux strategy to 0, and the merger of some APK ODEX, joined the relevant Busybox. Hide the shortcut icon for the personality settings, you can use the drop-down status bar click on the lunar calendar or settings – personality settings can quickly enter the personality settings, and can also be created through the personality settings in the shortcut icon to the desktop!
● based on V5.17.3.24 | development version of the full-featured NFC, a friend that invalid question, where I put the specific use and talk about everyone! Open the steps: personality settings – advanced – full-featured NFC (click on the switch, given the ROOT authority will prompt the full function of NFC open success, please restart the system) – restart the system – this time you can use full-featured NFC, Z11 and Z11MINIS NFC modules are close to the screen, not the other machines on the back of the phone! The need to simulate or read and write IC card attached to the screen back and forth to move slowly, the phone will respond to the prompt! 24 | development version of the mandatory modification selinux strategy to 0, and merged part of the APK ODEX, joined the relevant Busybox. Hide the shortcut icon for the personality settings, you can use the drop-down status bar click on the lunar calendar or settings – personality settings can quickly enter the personality settings, and can also be created through the personality settings in the shortcut icon to the desktop! ● based on V5.17.3.24 | development version of the full-featured NFC, a friend that invalid question, where I put the specific use and talk about everyone! Open the steps: personality settings – advanced – full-featured NFC (click on the switch, given the ROOT authority will prompt the full function of NFC open success, please restart the system) – restart the system – this time you can use full-featured NFC, Z11 and Z11MINIS NFC modules are close to the screen, not the other machines on the back of the phone! The need to simulate or read and write IC card attached to the screen back and forth to move slowly, the phone will respond to the prompt! 24 | development version of the mandatory modification selinux strategy to 0, and merged part of the APK ODEX, joined the relevant Busybox. Hide the shortcut icon for the personality settings, you can use the drop-down status bar click on the lunar calendar or settings – personality settings can quickly enter the personality settings, and can also be created through the personality settings in the shortcut icon to the desktop! ● based on V5.17.3.24 | development version of the full-featured NFC, a friend that invalid question, where I put the specific use and talk about everyone! Open the steps: personality settings – advanced – full-featured NFC (click on the switch, given the ROOT authority will prompt the full function of NFC open success, please restart the system) – restart the system – this time you can use full-featured NFC, Z11 and Z11MINIS NFC modules are close to the screen, not the other machines on the back of the phone! The need to simulate or read and write IC card attached to the screen back and forth to move slowly, the phone will respond to the prompt!